PorscheFans 914, January 1997

534 messages

  1. Re: A 914 grounded by fog? Cory Acuff
  2. Re: Calipers Andrew Kalman
  3. Installing TB Bushings (fwd) Dirk Wright
  4. interesting historical note Dirk Wright
  5. What is a rickydik? RD Rick
  6. 914 Parts John R. Hora
  7. Re: Calipers Jason Sneed
  8. ID'ing Heads Jay Laifman
  9. '73 1.7L for sale Tony Mori
  10. Re: A 914 grounded by fog? Derek Ziglar
  11. Re: A 914 grounded by fog? Dion Dunn
  12. Bronze rear shifter bushing for 914 Bryan R. Mattern
  13. Re: ID'ing Heads Chris Alexander
  14. Re: Calipers Jeffrey Dunning
  15. Re: Caught by Camera book on 914's Daniel B. Freedman
  16. Push rod tubes BSoldani at aol.com
  17. Looking for 914 parts and parts cars.. Shane Garner
  18. For Sale: Weber 40IDS3C carbs Jon Lowe
  19. Has the list been slow as of late Daniel B. Freedman
  20. Poly-graphite bushings for sale Michael Nugent, Ph.D.
  21. Hello ????? Don
  22. '73 914 NetShop North
  23. brake hardware source? Dirk Wright
  24. source for high grade metric hardware? Dirk Wright
  25. Trailing Arm Bushings and Chasis Stiffeners John R. Hora
  26. January Porsching Column Chris Welty
  27. Looking for a 914-6 Conversion Barry Yomtov
  28. some brake hardware found! Dirk Wright
  29. clunker law clarification Dirk Wright
  30. re: bronze rear shift bushings Brian Ng
  31. One of the first Boxsters in San Jose Ed Tecot
  32. 914 Owners Assoc. Convention TommyWmson at aol.com
  33. 914 FS Wayne Michelsen
  34. Re: Craig's Smog RD Rick
  35. Id'ing Heads Jay Laifman
  36. Re: 914 Owners Assoc. Convention Dirk Wright
  37. WTB: rear spring perches Dirk Wright
  38. Re: Mystery Heads Dave Darling
  39. 1997 Starten off good Don
  40. Where Is Everyone? aoca
  41. Re[2]: Craig's Smog Rochelle Grober
  42. Re: Craig's Smog Gary Helbig
  43. A 914 grounded by fog -- The Happy Conclusion Derek Ziglar
  44. Re: Re[2]: Craig's Smog Mike Willis
  45. Identifying Heads James K. Thorusen
  46. Re: Id'ing Heads Dirk Wright
  47. Trailing Arm Bushings John R. Hora
  48. Re: Trailing Arm Bushings Dirk Wright
  49. Re: Id'ing Heads Gary Helbig
  50. cold 914 NetShop North
  51. Re: 914 Owners Assoc. Convention Don
  52. Re: Trailing Arm Bushings Joshua Hadler
  53. re:914 battery TommyWmson at aol.com
  54. Arrrgh! Fuel pump again... Dave Darling
  55. Re: Trailing Arm Bushings Mike Lee - Team Banana Racing
  56. Re: Craig's Smog RD Rick
  57. Re: Trailing Arm Bushings Joshua Hadler
  58. Re: Trailing Arm Bushings Jon Lowe
  59. Warning regarding Dealership and Service Center Towing (fwd) Shane Garner
  60. Re: Looking for 914 parts and parts cars.. Shane Garner
  61. Re: 914 battery Joshua Hadler
  62. wheel and rear hub questions Ellis911 at aol.com
  63. Re: 914 battery Jeffrey Canaday
  64. Warning regarding Dealership and Service Center Towing (fwd) Mahmud_Farrukh at protek.co.uk
  65. Trailers Sheree.Wegeng at carle.com
  66. Re: 914 battery Dirk Wright
  67. 914 Wind Tunnel Tests aoca
  68. Trailers Stephen Jacobs
  69. Shane Garner's Post aoca
  70. Bushings aoca
  71. Re: 914 Wind Tunnel Tests Jeffrey Dunning
  72. Re:Lipshy Porsche in Austin, TX Todd B. Serota
  73. Idle Adj.for 1.8 Samsar ATM Co.
  74. Re: Bushings Dirk Wright
  75. RE: Warning regarding Dealership and Service Center Towing (fwd) Jeff H Baggett
  76. Re: Idle Adj.for 1.8 Dirk Wright
  77. Typical battery tray problems Guy Eddon
  78. Re: Typical battery tray problems Dirk Wright
  79. New Webpages Michael Nugent, Ph.D.
  80. Bumping CR on heads? Dion Dunn
  81. Re: Bumping CR on heads? Joshua Hadler
  82. Re: Optima batteries; battery tray rust Dave Darling
  83. Re: Bumping CR on heads? Mike Lommatzsch
  84. Re: wheel and rear hub questions Rick Eberle
  85. Re: wheel and rear hub questions Andrew Warren
  86. Re: wheel and rear hub questions Don
  87. Re: Typical battery tray problems James K. Thorusen
  88. Re: Bumping CR on heads? Dirk Wright
  89. RE: Typical battery tray problems Keller, Michael W
  90. Re: Typical battery tray problems RD Rick
  91. Fwd: Re: WTB: Porsche 914 parts RD Rick
  92. Dealing with 914 rust Mark R Dr. Winkle
  93. Re: Idle Adj.for 1.8 Dave Darling
  94. Re: Fwd: Re: WTB: Porsche 914 parts Don
  95. 914-6 inspection Douglas Holtsinger
  96. 914 Delco battery info TommyWmson at aol.com
  97. cold 914 NetShop North
  98. Cleaning out center tunnel? Mike Lee - Team Banana Racing
  99. Re: Bumping CR on heads? David Ferguson
  100. Re: 914 Delco battery info Andrew Kalman
  101. Re: Dealing with 914 rust Dirk Wright
  102. Re: Dealing with 914 rust Cory Acuff
  103. Out of Touch... Dave Darling
  104. Re: Dealing with 914 rust Stephen Jacobs
  105. Re: Bumping CR on heads? Stephen Jacobs
  106. 914-6 inspection Stephen Jacobs
  107. 73+ tranny rear cover? Jeff Lorentzen
  108. Re: Bumping CR on heads? Dion Dunn
  109. Re: 914-4 Rear Brake Proportioning Valve Bernie Chmielewski
  110. Re: mesh material for engine lid and misc. Bernie Chmielewski
  111. Re: 73+ tranny rear cover? Don
  112. 914 heads & CR Larry Moeller
  113. Re: 73+ tranny rear cover? Dirk Wright
  114. Re: 914 Wind Tunnel Tests RD Rick
  115. Re #2: 914 Wind Tunnel Tests RD Rick
  116. Trade Weber 40IDAs for Solex 40PII PMLetter at aol.com
  117. 914 heat smell Mark Krieger
  118. Re: 914 heat smell Joshua Hadler
  119. greased your steering rack lately? Dirk Wright
  120. Re: 914 heads & CR Dirk Wright
  121. oil cooler Larry Moeller
  122. perlux ignitor Larry Moeller
  123. Re: oil cooler Joshua Hadler
  124. Re: oil cooler Rick Eberle
  125. Re: perlux ignitor Andrew Kalman
  126. Re; Timing Marks on Fan James K. Thorusen
  127. Re: 914 Fuel Requirements James K. Thorusen
  128. Re: 914 Fuel Requirements RD Rick
  129. Re: 914 heads & CR Larry Moeller
  130. Re: oil cooler Dion Dunn
  131. Re: oil cooler Don
  132. Re: oil cooler Joshua Hadler
  133. Re: oil cooler Don
  134. Don Haney's GT Lids MrBru
  135. Re: oil cooler Dirk Wright
  136. Engine sheetmetal Jon Lowe
  137. Re: 914 Digest for 12 Jan 1997 A914GUY
  138. Replacing Rear Bushings John R. Hora
  139. Re: oil cooler Stephen Jacobs
  140. Aerodynamics aoca
  141. value of a 72 914 Jim Cowan
  142. Re: value of a 72 914 Dirk Wright
  143. Re: Aerodynamics Dirk Wright
  144. re-ringing a 4 pooper? Dirk Wright
  145. Hewland Gear Box Legal? EHSMITH.US.ORACLE.COM
  146. (no subject) Jerry Morris
  147. Re: Hewland Gear Box Legal? Scott Winders
  148. dumb question.. Dirk Wright
  149. Fuel Leak Barry Yomtov
  150. Re: Aerodynamics aoca
  151. Re: Fuel Leak Gary Helbig
  152. Re: Fuel Leak Joshua Hadler
  153. RE: Trade Weber 40IDAs for Solex 40PII Jeff H Baggett
  154. Re: Aerodynamics Dave Cooley
  155. (no subject) Jerry Morris
  156. Re: value of a 72 914 Gary Helbig
  157. Re: Aerodynamics Andrew Warren
  158. Finally, A nice 914 j g shepard
  159. RE: Hewland Gear Box Legal? Kevin Gross
  160. RE: Hewland Gear Box Legal? Scott Winders
  161. Re: Aerodynamics RD Rick
  162. RE: Hewland Gear Box Legal? Kevin Gross
  163. sixer alternator noises, Introduction John Cullen, Jr.
  164. Re: Hewland Gear Box Legal? John Cullen, Jr.
  165. GT2 Body Kits for 914? Michael R Schmidt
  166. Shifting Difficulties with 914-6 Conversion (915 tranny) Michael R Schmidt
  167. Re: GT2 Body Kits for 914? Scott Winders
  168. Re: Shifting Difficulties with 914-6 Conversion (915 tranny) Scott Winders
  169. Re: Hewland Gear Box Legal? PM9146 at aol.com
  170. Brake Lines Andy Lester
  171. Fiberglass front bumpers Michael Nugent, Ph.D.
  172. (no subject) mike cooley
  173. Re: oil cooler James K. Thorusen
  174. Re: Fiberglass front bumpers Don
  175. Re: Rear Camber James K. Thorusen
  176. Re: Rear Camber Don
  177. 75and 76 Rubber Bumpers for sale IlXlr8 at aol.com
  178. 2.0L Euro Pistons and Cyl. IlXlr8 at aol.com
  179. Re: Finally, A nice 914 Dirk Wright
  180. Re: Aerodynamics Dirk Wright
  181. Re: Brake Lines Dirk Wright
  182. Re: Hewland Gear Box Legal? Daniel B. Freedman
  183. Re: C-B-C Book Buy report Daniel B. Freedman
  184. Re: Fiberglass front bumpers MrBru
  185. Ball Joint Removal? Gensler, Mike
  186. Re: Finally, A nice 914 Don
  187. 914-6GT mesh material Stephen Jacobs
  188. dumb question.. Stephen Jacobs
  189. Re: 914-6GT mesh material Don
  190. RE: dumb question Keller, Michael W
  191. Re: Aerodynamics aoca
  192. Re: Porsche Address aoca
  193. Re: Finally, A nice 914 Dirk Wright
  194. Aerodynamics aoca
  195. 914 relay board Mark Krieger
  196. Re: Ball Joint Removal? Jason Sneed
  197. Re: 914-6GT mesh material Jason Sneed
  198. Re: 914-6GT mesh material MrBru
  199. I almost forgot DMER
  200. RE: Brake Lines Ronald Thumann
  201. Re: dumb question.. Dirk Wright
  202. Re: Aerodynamics Dirk Wright
  203. Re: Aerodynamics Dirk Wright
  204. Re: Aerodynamics Dirk Wright
  205. Re: Ball Joint Removal? Dirk Wright
  206. Re: 914-6GT mesh material mike cooley
  207. RE: Brake Lines Dirk Wright
  208. Re: Aerodynamics Mike Lee - Team Banana Racing
  209. trade for a 914 Brian Dierks
  210. Re: Aerodynamics mike cooley
  211. location of FAQ Brian Dierks
  212. bleed master cylinder ? ARPCAxPREZ at aol.com
  213. Re: bleed master cylinder ? Don
  214. Re: Finally, A nice 914 Dion Dunn
  215. Bleeding a fuel pump? Dion Dunn
  216. Re: 914 heads & CR-another question Dion Dunn
  217. re:willys trade Brian Dierks
  218. Mail Delivery Subsystem <postoffice@staff.juno.com>: Returned Samsar ATM Co.
  219. 1.8 Idle adj Samsar ATM Co.
  220. Insurance battles and stated values... Joshua Hadler
  221. RE: 75and 76 Rubber Bumpers for sale Michael Nugent, Ph.D.
  222. 914's and software Jeffrey Dunning
  223. Re: Aerodynamics Andrew Warren
  224. fuel drips Brian Ng
  225. Re: bleed master cylinder ? James K. Thorusen
  226. Re: Bleeding a fuel pump? James K. Thorusen
  227. Re: Bleeding a fuel pump? Dirk Wright
  228. Re: 914 heads & CR-another question Dirk Wright
  229. Re: Insurance battles and stated values... Dirk Wright
  230. Re: 914 Owners Assoc. Convention Jason Sneed
  231. Wheels needed Fred Pack
  232. Re: Fiberglass front bumpers PMLetter at aol.com
  233. alternative to seam sealer? Dirk Wright
  234. 914-6 Grills aoca
  235. More Aerodynamics aoca
  236. Re: alternative to seam sealer? Cory Acuff
  237. Re: alternative to seam sealer? Jason Sneed
  238. Re: 914-6GT mesh material Jon Lowe
  239. Re: 914-6GT mesh material Don
  240. H4 wattage, what's safe? Son Nguyen
  241. Re: 914 heads & CR-another question Daniel B. Freedman
  242. Re: 914 heads & CR-another question Bryan R. Mattern
  243. Re: Ball Joint Removal? (LONG) Dave Christiano
  244. GT lid Don
  245. Engines for sale REMYTEE at aol.com
  246. 914-6 GT engine lids RELNGSON
  247. Track day and rentals jacsqua
  248. six alternator noise Larry Moeller
  249. $$ value Larry Moeller
  250. brake prop valve Larry Moeller
  251. 914 Owners Association Convention A914GUY
  252. Re: $$ value Dirk Wright
  253. Tires for Autocross Bill Brinkmann
  254. Re: Tires for Autocross Joshua Hadler
  255. Tranny Leak Ken Korn (512)834-7095
  256. Re: Tranny Leak Joshua Hadler
  257. Re: Tires for Autocross Dave Cooley
  258. Re: More Aerodynamics Andrew Warren
  259. Re: Tires for Autocross Jeffrey Dunning
  260. 914 restoration cost: an example Dirk Wright
  261. Re: Tires for Autocross Joshua Hadler
  262. Re: 914-6 inspection Douglas Holtsinger
  263. Miscellaneous Parts Available Jerry R. Brady
  264. Re: 914-6 inspection Dirk Wright
  265. Re: Miscellaneous Parts Available Dirk Wright
  266. Re: Tires for Autocross Gary Helbig
  267. Re: 914-6 inspection Gary Helbig
  268. Re: Tires for Autocross Joshua Hadler
  269. Re: Tires for Autocross Jeffrey Dunning
  270. 914 Parts - Literally tons FS Stephen Jacobs
  271. Re: 914 aerodynamics aoca
  272. (no subject) Charlie White
  273. (no subject) Charlie White
  274. 914 fuel pump Mark Krieger
  275. Simple tow bar? Jeff Lorentzen
  276. Re: 914-6 inspection Dave Christiano
  277. Re: 914-6 inspection John Cullen, Jr.
  278. Re: alternative to seam sealer? James K. Thorusen
  279. Re: $$ value James K. Thorusen
  280. Oil pressure relief valve Racinjohn at aol.com
  281. If Shakespeare had owned a 914... James K. Thorusen
  282. Fuchs Don
  283. Re: 914 fuel pump Dirk Wright
  284. Re: If Shakespeare had owned a 914... Dirk Wright
  285. Re: Fuchs Dirk Wright
  286. Re: 914-6 inspection Dirk Wright
  287. Re: Simple tow bar? Jon Lowe
  288. Re: If Shakespeare had owned a 914... RD Rick
  289. Re: 914 restoration cost: an example Dion Dunn
  290. Wanted weber carb set J.D. Aikens
  291. Re: 914-6 inspection Thomas Evaul
  292. Re: 914-6 inspection Douglas Holtsinger
  293. Re: 914 restoration cost: an example Dirk Wright
  294. Re: 914-6 inspection Dirk Wright
  295. Boxster in MA BSoldani at aol.com
  296. $$ 914-4 to 914-6? Brian Dierks
  297. Re: oil cooler Chip Stratton
  298. Re: $$ 914-4 to 914-6? Joshua Hadler
  299. Re: $$ 914-4 to 914-6? Jeffrey Dunning
  300. Parts for sale A914LUVR at aol.com
  301. Re: Simple tow bar? Keller, Michael W
  302. Re: 914 restoration cost and 914-6 inspection Keller, Michael W
  303. Re: 914 restoration cost and 914-6 inspection Dirk Wright
  304. Re: oil cooler Dirk Wright
  305. oil pressure relief valve Racinjohn at aol.com
  306. RE: Insurance battles and stated values... ARPCAxPREZ at aol.com
  307. Re: $$ 914-4 to 914-6? Gary Helbig
  308. Announcement: Zone 1 Tech Tactics, March 7-8-9, 1997 George Beuselinck
  309. spongy brakes Thom Kuby
  310. spongy brakes/2 Thom Kuby
  311. Rear Swing Arm Bushing Craig Crease
  312. Re: 914 restoration cost and 914-6 inspection Jeffrey Dunning
  313. Re: $$ 914-4 to 914-6? Jeffrey Dunning
  314. 901 U 4/5 Gear needed PMLetter at aol.com
  315. Re: $$ 914-4 to 914-6? Andrew Warren
  316. Re: $$ 914-4 to 914-6? Joshua Hadler
  317. Re: spongy brakes James K. Thorusen
  318. Re: Rear Swing Arm Bushing Joshua Hadler
  319. Re: spongy brakes Joshua Hadler
  320. Re: Sticking Caliper James K. Thorusen
  321. Heater ducting. James H. Stoner
  322. Re: 914-6 inspection Cory Acuff
  323. Re: Rear Swing Arm Bushing Jon Lowe
  324. Re: Heater ducting. Dirk Wright
  325. postmortem-spongy brakes Thom Kuby
  326. wiring diagrams Thom Kuby
  327. Re: wiring diagrams RD Rick
  328. remove my name johnvagliardo
  329. How to lube accellerator cable? ARPCAxPREZ at aol.com
  330. RE: 914-6 Conversions Johanson, Al
  331. RE: Spongy Breaks Gensler, Mike
  332. Gauges for sale Charlie White
  333. Re: How to lube accellerator cable? RD Rick
  334. 914-6 Conversions A914GUY
  335. Porsche parts FS
  336. Average temps on 2.0L, wheel adapters? Jeff Lorentzen
  337. rebuild cylinders (was Re: spongy brakes) Jeff Lorentzen
  338. Re: Average temps on 2.0L, wheel adapters? Dirk Wright
  339. Re: Average temps on 2.0L, wheel adapters? Mike Lee - Team Banana Racing
  340. Re: How to lube accellerator cable? Joshua Hadler
  341. Weltmeister through-body front sway bar install. Mike Lee - Team Banana Racing
  342. RE: 914 Fuel Requirements Ken Korn (512)834-7095
  343. 914 rear hub/axle bearing question MrBru
  344. Weltmeister Vs. AJ USA NINE4TEEN at aol.com
  345. Auto Atlanta reproduction rubber Jeff Lorentzen
  346. Recognize this aftermarket steering wheel? Jeff Lorentzen
  347. 2.0L temps Dave Darling
  348. 914-6 for sale Michael Hill
  349. (no subject) John Snodgrass
  350. Sway bars Racinjohn at aol.com
  351. Re: Recognize this aftermarket steering wheel? ARPCAxPREZ at aol.com
  352. Re: Auto Atlanta reproduction rubber Dirk Wright
  353. Convertible or Roadster ? ARPCAxPREZ at aol.com
  354. Re: BOXSTER for Sale at STICKER PRICE HENSLEY 608-342-1657
  355. Summary: Weltmeister through-body front sway bar install: Mike Lee - Team Banana Racing
  356. 914 1.7L engine to 2.0L change Archie
  357. 914 Motor Change Archie
  358. Re: 914 1.7L engine to 2.0L change Gary Helbig
  359. Re: 914 Digest for 21 Jan 1997 rjuan at csc.com
  360. GT Flaires Don
  361. GT Flaires Don
  362. Re: Convertible or Roadster ? James K. Thorusen
  363. Wanted : 914 2.0 Motor NINE4TEEN at aol.com
  364. Re: Convertible or Roadster ? Andrew Warren
  365. Re: Convertible or Roadster ? Dirk Wright
  366. Re: 914 1.7L engine to 2.0L change Bill Dugan
  367. Fwd: Re: Cold? What is your definition of Cold? RD Rick
  368. Re: C-B-C Book Buy report Daniel B. Freedman
  369. Re: Tranny Leak Ken Korn (512)834-7095
  370. subscription Thak Chaloemtiarana
  371. Rear Spring Barry Yomtov
  372. 1.7 -> 2.0 swap Dave Darling
  373. Re: Tranny Leak Joshua Hadler
  374. Re: 1.7 -> 2.0 swap Mike Lommatzsch
  375. MID ENGIN Porsche BOXSTER Filip Fischlein
  376. Re: Rear Spring Jeffrey Dunning
  377. Re: 1.7 -> 2.0 swap Dirk Wright
  378. Re: Convertible or Roadster ? Gary Helbig
  379. Any 76 1.8's out there? Dave Darling
  380. RACE TIRES Fred Pack
  381. Re: RACE TIRES EHSMITH.US.ORACLE.COM
  382. Re: MID ENGIN Porsche BOXSTER Tom Morgan
  383. Re: Convertible or Roadster ? Mike Willis
  384. Convertible Mike Willis
  385. Re: RACE TIRES Mike Willis
  386. Re: RACE TIRES Joshua Hadler
  387. 914 1.7 to 2.0 conversion Brian Ng
  388. Calif. SB42 and smog laws Jeff Lorentzen
  389. Re: Convertible or Roadster ? Derek Ziglar
  390. Re: Rear Spring Jeffrey Canaday
  391. 914 seat PORPARTS at aol.com
  392. oil pressure relief valve Racinjohn at aol.com
  393. Re: Rear Spring Andrew Warren
  394. Oil DWNSHFT at aol.com
  395. Re: Rear Spring Jeffrey Canaday
  396. Heavy Duty shift spring ARPCAxPREZ at aol.com
  397. O rings and thrust washers.. Dirk Wright
  398. Re: Rear Spring Dirk Wright
  399. Re: Rear Spring MrBru
  400. Re: C-B-C Book Buy report Daniel B. Freedman
  401. Re: 914 seat Daniel B. Freedman
  402. 914 rear caliper rebld MrBru
  403. Re: Any 76 1.8's out there? PM9146 at aol.com
  404. Oil change intervals & Oil Additives Marvin L Debeque
  405. Re: 914 rear caliper rebld Ken Korn (512)834-7095
  406. Re: Oil Joshua Hadler
  407. EC reviews Mark Stephens 2.0 cylinder heads Pete Klager
  408. Re: 1.7 -> 2.0 swap PM9146 at aol.com
  409. Re: Rear Spring Andrew Warren
  410. Re: 914 rear caliper rebld Gary Helbig
  411. Re: EC reviews Mark Stephens 2.0 cylinder heads Dirk Wright
  412. RE: EC reviews Mark Stephens 2.0 cylinder heads Craig Zaplatynsky-CCZ001
  413. Cooling flaps missing in shroud Jeff Lorentzen
  414. Re: 914 rear caliper rebld Thomas Evaul
  415. AAAARRRRGGGGGHHHH! -again- Joshua Hadler
  416. Re: Oil change intervals & Oil Additives Don
  417. Re: 914 rear caliper rebuild James K. Thorusen
  418. wanted Porsche 914-6 Wienands Arno
  419. wat is... Wienands Arno
  420. Smog II experience RD Rick
  421. Re: 914 rear caliper rebld Dave Christiano
  422. Re: AAAARRRRGGGGGHHHH! -again- Bernie Chmielewski
  423. Cooling flaps DWNSHFT at aol.com
  424. Oil pressure relief valve Racinjohn at aol.com
  425. Re: Cooling flaps missing in shroud Dirk Wright
  426. I bought a bimmer today Dirk Wright
  427. Re: suspension mods Larry Moeller
  428. [Fwd: Re: six trans conversion] Larry Moeller
  429. [Fwd: Re: rear calipers,] Larry Moeller
  430. Re: Phantom Rear caliper Part James K. Thorusen
  431. Oil Additives James K. Thorusen
  432. Re: [Fwd: Re: rear calipers,] Jon Lowe
  433. Re: Phantom Rear caliper Part Jon Lowe
  434. Free Ads in PML for list members PMLetter at aol.com
  435. 914 Tool Kit rjuan at csc.com
  436. SALE ? Don
  437. THANKS--caliper rebld info MrBru
  438. 2.0 L heads Cory Acuff
  439. 2.0 L heads Cory Acuff
  440. my address has changed Dirk Wright
  441. Cranky... Thom Kuby
  442. Re: wanted Porsche 914-6 ARPCAxPREZ at aol.com
  443. Re: Cranky... Gary Helbig
  444. ? Who has half-shafts for sale? Anand Iyengar
  445. Re: $$ 914-4 to 914-6? Easley Jerry W
  446. Re: oil cooler Easley Jerry W
  447. Fuel Lines Ken Korn (512)834-7095
  448. Rust on rotors. Jeff Lorentzen
  449. Boxter? Anand Iyengar
  450. Re: Rust on rotors. Gary Helbig
  451. Re: SALE ? Jon Lowe
  452. Progress... Dave Darling
  453. Re: $$ 914-4 to 914-6? Andrew Warren
  454. Wheels adapters, alloys and torque setting? Jeff Lorentzen
  455. Re: Cranky... Dion Dunn
  456. Re: Boxter? Dion Dunn
  457. Re: Wheels adapters, alloys and torque setting? Dave Darling
  458. Fuel pump relocation question Dion Dunn
  459. Re: Wheels adapters, alloys and torque setting? Andrew Warren
  460. Tire Pressures Timothy Gordon
  461. Re: Tire Pressures vinnie
  462. RE: SALE ? Andy Lester
  463. Re: Tire Pressures Joshua Hadler
  464. Re: Cranky... Jeffrey Canaday
  465. 914 tool kit Filip Fischlein
  466. Re: Rust on rotors. James K. Thorusen
  467. Re: Cranky... James K. Thorusen
  468. I'm gonna paint my tranny case. Dirk Wright
  469. Re: Cranky... RD Rick
  470. RE: Fuel Lines ARPCAxPREZ at aol.com
  471. Re: Cranky... Ken Korn (512)834-7095
  472. BOXSTER for Sale HENSLEY 608-342-1657
  473. RE: Fuel pump relocation question Keller, Michael W
  474. 914 For Sale Craig Strickland
  475. Boxster handling? PLAlbrecht at aol.com
  476. RE: Fuel Lines Stephen Jacobs
  477. Re: Fuel Lines Ken Korn (512)834-7095
  478. RE: Fuel Lines -replacement Jeff Lorentzen
  479. Re: $$ 914-4 to 914-6? Easley Jerry W
  480. 914: gas smell Brian Ng
  481. Re: 914: gas smell Joshua Hadler
  482. Re: Fuel Lines James K. Thorusen
  483. Re: I'm gonna paint my tranny case. James K. Thorusen
  484. 914 Rear Caliper Rebuild Caution James K. Thorusen
  485. Re: Fuel Lines Ken Korn (512)834-7095
  486. Paint aoca
  487. Sway Bars (again) Jeffrey Dunning
  488. turning rotors Gerald Austin
  489. Re: Paint Dirk Wright
  490. Re: Sway Bars (again) Jon Lowe
  491. Re: Sway Bars (again) Ken Korn (512)834-7095
  492. Console Clock Repair Stephen Jacobs
  493. C-B-C Books Daniel B. Freedman
  494. Re: 914 Rear Caliper Rebuild Caution MrBru
  495. Re BOXSTER Filip Fischlein
  496. Re: Console Clock Repair Ken Korn (512)834-7095
  497. Re: 914 Rear Caliper Rebuild Caution Don
  498. NOTE 01-29-97 02:28:54 PM Gerald Austin
  499. Re: Fuel Lines Joshua Hadler
  500. Re: I'm gonna paint my tranny case. Joshua Hadler
  501. Re: Fuel Lines Pete Klager
  502. Why all this =20 Filip Fischlein
  503. RE: Fuel Lines Craig Zaplatynsky-CCZ001
  504. RE: Fuel Lines Jeff Lorentzen
  505. Re: Fuel Lines Ken Korn (512)834-7095
  506. Re: Fuel Lines Jon Lowe
  507. Re: Fuel Lines Jon Lowe
  508. Re: Fuel Lines Nathan J Nagel
  509. Re: Fuel Lines Joshua Hadler
  510. Re: Sway Bars (again) Jeff Lorentzen
  511. autox@autox.team.net article Jeffrey Dunning
  512. Fla events? Brian Dierks
  513. Oil for 914/912E Wesley Bullock
  514. Re: Oil for 914/912E Joshua Hadler
  515. Restud or Not to Restud....... Don
  516. 6th Annual 914 Renegade Festival James K. Thorusen
  517. NOTE 01-31-97 08:48:14 AM Gerald Austin
  518. West Coat Renegade Event Posting A914GUY
  519. Re: Oil for 914/912E Gary Helbig
  520. Pics aoca
  521. PFans Pictures on the Web (was: Re: NOTE 01-31-97 08:48:14 AM) Andrew Warren
  522. Spare plug wires? Jeff Lorentzen
  523. Re: Spare plug wires? Don
  524. RES Systems?? Dirk Wright
  525. Re: Spare plug wires? Dirk Wright
  526. Re: Spare plug wires? Andrew Kalman
  527. Re: Oil for 914 David Ungar
  528. What motor in a 914 Joe Davis
  529. Re: Spark plug wires? James K. Thorusen
  530. Fuchs clock Don
  531. Fuel Injectors...AAARRRGGGHHH! James K. Thorusen
  532. WANTED: Posters John Chesworth
  533. Re: What motor in a 914 Joshua Hadler
  534. (no subject) Bernie Chmielewski